Neuester Blog
1064-nm-Infrarotlaser vs. 355-nm-UV-Laser, was ist der Unterschied?
Jun 09 , 2023Heutzutage, mit der rasanten Entwicklung der Lasertechnologie, werden Laserbeschriftungsmaschinen mit Luftkühlung in vielen Anwendungen von der Autoteile- bis zur Medizinindustrie usw. weit verbreitet eingesetzt. Diese Markierungsprozesse haben unsere Produktionseffizienz erheblich gesteigert. Im Vergleich zu anderen Lasertechnologien Unter diesen sind Infrarotlaser und Ultraviolettlaser die beiden am häufigsten verwendeten Lasertypen. Sie haben aufgrund ihrer hervorragenden Leistung große Vorteile gegenüber anderen Lasermarkiermaschinentypen. Was ist der Unterschied zwischen Infrarotlaser und UV-Laser? Lassen Sie uns machen Einige Vergleiche der beiden Laser:
Infrarot-YAG-Laser
Infrared YAG laser (wavelength is 1.06μm) is one of the most widely used laser source in material processing.However, many plastics and flexible circuit boards based on a large amount of special polymers (such as polyimide) cannot be high accuracy processed by infrared laser or "heat" treatment due to "heat" deforms the plastic and produces carbonized damage on the edges of cutting or engraving, which may need some subsequent processing steps have to be added to improve processing quality. Therefore, infrared lasers are not suitable for the processing of certain flexible circuits. In addition, the wavelength of infrared lasers cannot be absorbed by copper even at high energy level,So these factors severely affect its range of application.
UV laser
However, the wavelength of UV lasers is below 0.4μm, which is suitable for processing polymer materials because of its shorter wavelength.
Unlike infrared laser,UV laser processing is not essentially "heat" treatment,which belongs to "cold processing".Moreover,most materials can absorb ultraviolet light more easily than infrared light. High-energy ultraviolet photons directly break the molecular bonds on the surface of many non-metallic materials resulting in more smooth edges and minimal carbonization by these "cold" photoetching technology.
The short-wavelength characteristics of UV laser are better to fine processing of metals and polymers.These light spot can be focused on the order of sub-micron level, so it is very suitable for fine work processing even at low pulse energy levels.
Fine laser processing have been widely used in many industries, and there are two main laser:
One is infrared lasers: The principle of work is to use laser beam to heat and vaporize (evaporate) the surface of the material to remove the material, usually called "thermal processing". YAG laser (wavelength 1.06μm) is mainly used.
Two is ultraviolet lasers: The principle of work is to use high-energy ultraviolet photons to directly break the molecular bonds on the surface of many non-metallic materials, and make the molecules are separated from the object without producing high heat,usually called "cold processing", and ultraviolet lasers (wavelength is 355nm) is mainly used.
The comparison between ultraviolet laser and ordinary infrared laser is like below:
| Laser type |
UV laser |
Infrared laser |
| Wavelength |
Short(266nm,355nm) |
Long(10.64um) |
| Beam quality |
high |
good |
| Single photon energy |
Large |
small |
| Processing |
Cold processing |
Heat processing |
| Material |
Large range(hardly all material) |
Narrow range |
| Marking line width |
narrow(10um) |
width(＞20um) |
| Affect area |
small |
large |
Through the comparison that the ultraviolet laser can perform ultra-fine marking and special material marking because of its very small focus spot and minimal processing heat-affected area.Therefor, UV laser is the first choice for customers who have higher requirements for high accuracy marking.
Above the comparison of infrared and ultraviolet lasers，We know that both laser due to the different laser wavelength and the processing methods have own application. Ultraviolet lasers are more suitable for precision processing or 3D printing, while infrared lasers with high power are more suitable for industrial cutting and welding applications. In terms of price, At the same specification ultraviolet lasers are more expensive than infrared lasers.
Today,we will recommend you RFH UV laser brand from China.
RFH UV Laser Marking Module used for paint stripping on plastic
To meet the market demand, RFH newly developed S9 series UV laser in 2020. Comparing with its kinds, S9 series UV laser features with rugged sealed cavity, extremely compact size, simple and robust, high stability, high efficiency, high reliability and excellent laser beam quality.Its compact design suggests no necessity in building big light path, which greatly reduces space and cost and makes it easy to be installed into UV laser marking machines. In addition, S9 series cavity structure is more stability and more excellent scalability, which means the same laser cavity can be produces multi-power lasers , and the stability of different power ranges is greatly improved
