UV laser marking, auto parts will use plastic as much as possible

Automobile lightweight has become an important direction for the development of the automobile industry, which not only improves automobile driving performance, but also enhances automobile safety, saves fuel costs, production and manufacturing costs, and further meets market demand. When designing and producing cars, various manufacturers have achieved the goal of reducing the weight of cars by widely applying lightweight plastic products. It can be said that in addition to the use of high-strength materials for the body, many parts will use plastic as much as possible. According to experiments, the quality of the car is reduced by half, and the fuel consumption will also be reduced by nearly half.

The interior is an important part of the lightweight of the vehicle

The front and rear bumpers of the car are more typical representatives. In the early years, automobile body bumpers were made of metal. Some were stamped with steel plates and then welded to the body. However, due to factors such as automobile lightweight, mass production and aesthetics, automobile manufacturers finally found A better alternative-plastic bumpers. Plastic bumpers can not only save manufacturing costs, but also have lower requirements on the industrial level and are easier to produce. Therefore, after the manufacturing cost is controlled, it will eventually be reflected in the price of the car.

Exterior decoration is an important part of vehicle lightweight

The lightweight of automotive interior and exterior accessories is an important part of the lightweight of the whole vehicle. With the continuous in-depth research and development of plastic technology, many auto parts have reached the demand for plasticization, including instrument panels, door inner panels, and body covers. Parts, chassis, bumpers, fuel tanks, engine intake manifolds and clutch actuator systems, etc.

Laser cutting plastic nozzles to accelerate the pace of weight reduction

Um der Massenproduktion gerecht zu werden, werden die meisten dieser Kunststoffteile im Spritzgussverfahren hergestellt. Beim Spritzgießen entstehen zwangsläufig Düsen. Düse bezieht sich auf den nach dem Spritzgießen hergestellten Teil des Angusskanals, bei dem es sich um überschüssiges übrig gebliebenes Material außer dem Produkt handelt, wie z. Diese überschüssigen Abfälle müssen vor dem Zusammenbau geschnitten werden.

UV-Laser  | grüner Laser  | UV-Laser  | UV-DPSS-Laser  | Nanosekundenlaser  | UV-Laserquelle  | Festkörperlaser

Laserschneiden ist zur Hauptausrüstung geworden

Heutzutage ist das Laserschneiden beim Schneiden von Kunststoffdüsen zur Hauptausrüstung geworden. Wie wir alle wissen, hat die Laserschneidmaschine eine sehr hohe Präzision und Genauigkeit. Da diese Kunststoffdüsen unterschiedliche Formen und Größen haben, stellen sie höhere Anforderungen an das Schneiden. Wenn sie jedoch manuell sind, kann die Schnittgenauigkeit nicht garantiert werden, und die Effizienz ist nicht hoch, und die Geschwindigkeit ist langsam. Daher löst die Laserausrüstung dieses Problem gut.