Teach you how to avoid the UV laser source “heavy cold”

The autumn wind is blowing, the winter is approaching, the miles are frozen, and the snow is floating. In the cold winter temperature conditions, if you don’t have careful maintenance, the laser working hard day and night may also have a “heavy cold”: when the ambient temperature drops below the freezing point, the coolant in the laser will change from liquid to solid. The volume of solid coolant will increase significantly, which will create the risk of rising water pipes. Once the internal components are cracked, it is likely to face the dilemma of returning to the factory, which will bring greater economic losses to users.

People get a bad cold and can take medicine to drip, and how to prevent and cure the “heavy cold” of the laser? Don’t worry, now teach you how to prevent it!

（1）

Ensure that the signal linkage between the water cooler and the laser is in effect, affecting the core components of the laser in the event of a malfunction of the waterproof cooler.

（2）

Do not turn off the water cooler, especially at night, please ensure that the water cooler does not stop, and the water temperature can be set between 5~10 °C to ensure the normal flow of the coolant and the temperature is above the freezing point.

（3）

Antifreeze is added to the cooling water. The antifreeze solution is generally recommended to be a mixture of ethanol and water. For every 10% increase in the ethanol content, the freezing point of the mixture drops by about 10 °C to determine the amount of ethanol added. Of course, we can also choose antifreeze in the market, such as Clariant AntifrogenN antifreeze, the ratio of antifreeze to deionized water is 3:7, according to this ratio can increase the freezing point of the coolant to -20 °C. In addition to the two solutions mentioned above, customers should not use car or other machine tool antifreeze instead, because these antifreezes may contain components that corrode metal parts and rubber water pipes, and even cause irreparable damage to the fiber.

（4）

Wenn der Laser längere Zeit nicht verwendet wird, lassen Sie das Kühlmittel aus dem Laser ab. Eine einfache Entleerung ist nicht möglich, wir können das Kühlmittel durch externe Begasung vollständig entleeren. Die spezifische Methode besteht darin, das Wasserrohr des Wassereinlasses vom Laser zu entfernen und den Wassereinlass mit komprimiertem Gas (Druck < 3 bar) zu komprimieren, bis das restliche Kühlmittel des internen Wasserkreislaufs aus dem Wasserauslass abgelassen ist, wie in gezeigt die folgende Abbildung.

UV-Laser  | grüner Laser  | UV-Laser  | UV-DPSS-Laser  | Nanosekundenlaser  | UV-Laserquelle  | Festkörperlaser

Flexibler Einsatz der oben genannten Methoden, eine gute Präventionsarbeit leisten, können Sie sicherlich einen guten Laser pflegen, um die „starke Erkältung“ des Lasers im Winter zu verhindern.